Mosquito Magnet INDEPENDENCE Spezifikationen PDF herunterladen (Seite 4)

Assembly Instructions

Trap Assembly:

Bug bag locks into front of compartment

Place base upside down on a flat surface, unfold U-

shaped support leg until it locks in place.

Place trap power head onto pole. Press down firmly

with two hands to secure.

Assembled trap should have the front of power head/

trumpet placed farthest from the wheels in the same

direction as base U-shaped legs.

Turn base and leg assembly right-side-up and place

support pole into cavity on base.

Step 1

Step 2

Step 3

Set-Up

Trap Placement

1. Determine the direction of the prevailing wind.

Check local weather patterns if you are unsure.

2. Stand in the center of the area you are trying to protect

and look toward the prevailing wind.

3. Proper placement of the trap will be 10 meters in front of

you, within 1.5 meters of ground cover (i.e. bushes,

flowerbeds, tree line, marshbed). Ensure that trap is not

directly against any blockades such as buildings, fences, etc.

4. It is recommended that the trap be placed in the shade.

5. Do not place trap directly above a water source

(sprinklers, hose, etc.).

6. Trap must be placed on level ground to avoid tipping

or uneven propane distribution.

7. For optimal trap placement in your yard, refer to the

instructional CD-ROM included with your trap; or, go to

www.mosquitomagnet.com to build your own yard

diagram for correct trap placement.

Bug Bag Installation:

Reach in the bug bag and fully open the drawstring

entrance before installing. This will help optimize the airflow

which will enhance the performance of your trap.

Lift clear plastic lid and lock plastic holding bracket of bug

bag into front of compartment. Close plastic lid when

finished.

Note: Fabric loops hook over plastic posts allowing bug

bag to expand to its highest capacity.

Open battery door in the rear of the trap.

Step 4

Place four (4) ‘C’ batteries in the battery cage. Insert

battery cage connector in the power receptacle until it

latches, then insert the battery cage in the opening.

Step 5

Close battery door when complete (snaps into place).

The batteries will last all season.

Step 6

1440-632_Indep_Scan_2011B 12/14/11 11:41 AM Page 7

1 2 3 4 5 6 7 8 9 ... 34 35

Kommentare zu diesen Handbüchern

Keine Kommentare

Mosquito Magnet INDEPENDENCE Spezifikationen Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gartenwerkzeuge Mosquito Magnet INDEPENDENCE